top of page

The Datapath Fx4 is a multi-faceted stand alone display controller that supports a choice of inputs, high bandwidth loop-through as well as 4 genlocked outputs in either DisplayPort or HDMI.



• Infinite creative configurations
• Up to UHD / 4K60 input, four HD 1080p outputs
• Rotates, crops, scales, mirrors and bezel corrects
• Multiple inputs for flexible connectivity (Dual HDMI1.4 or single DisplayPort1.2 inputs
• HDCP support on all inputs and outputs
• True stand-alone operation: Fx4 can adapt to changes in inputs by adjusting all scale factors
• Network or USB interfaces allow platform independent control (MAC OS X 10.6 & later)
• Pre-load an image for use when signal is not detected



  • Dimensions : 316 x 172 x 42mm (1.86kg)

  • Operating Temperature : 0 - 35 oC/32 - 96 oF

  • Power requirements : IEC switched and fused mains connector 100-240V, 50/60Hz / 35W

  • Video Input Connections : DisplayPort1.2 or 2 x HDMI1.4 (2160p/60 or equivalent up to 616MP/s)

  • Video Output connections : HDMI version: 4 x HDMI1.3 (1080p/60 or equivalent up to 165MP/s), DisplayPort version: 4 x DP1.1 (1080p/60 or equivalent up to 165MP/s), Loop-through (both versions): DisplayPort1.2 (locked to selected video input resolution)

  • Input Surface : 8k x 8k maximum

  • Genlock Input : Analog black-burst on dedicated BNC connector. Any video input (HDMI1, HDMI2, DisplayPort)

  • Control Interfaces : Dual 100BaseT Ethernet ports with inbuilt managed switch. USB 2.0 Type B connector (full speed operation)

  • Firmware Support : Updates supported via USB and Ethernet connection

  • Storage : -20 to 70°C Relative

  • Humidity : 5%-90% non-condensing

  • Warranty : 3 years

Datapath Fx4 Display Controller

    bottom of page