top of page

The Datapath Fx4-SDI offers the perfect solution for staging and televised video walls. Delivering four SDI outputs and the ability to loop multiple units together, even the largest, most complex video wall installations are possible.



Infinite creative configurations
Up to UHD / 4k 60 input, four SDI 1080p outputs
Rotates, crops, scales, mirrors and bezel corrects
Multiple inputs for flexible connectivity
True stand-alone operation: Datapath Fx4-SDI can adapt to changes in inputs by adjusting all scale factors
Network or USB interfaces allow platform independent control (MAC OS X 10.6 & later)
Pre-load an image for use when signal is not detected


Dimensions : 316 x 172 x 42mm (1.86kg)
Operating temperature : 0 - 35 oC/32 - 96 oF
Power requirements : IEC switched and fused mains connector 100-240V, 50/60Hz / 35W
Video input connections : 3G SDI (1080p/60 or equivalent up to 148.5MP/s) DisplayPort1.2 (2160p/60 or equivalent up to 616MP/s) HDMI1.4 (2160p/30 or equivalent up to 297MP/s)
Video output connections : 4 x 3G SDI (1080p/60 or equivalent up to 165MP/s) Loop-through: DisplayPort1.2 (locked to selected video input resolution)
SDI SMPTE standards : SMPTE ST 2048 up to 60Hz SMPTE 274M up to 60Hz SMPTE 296M up to 60Hz
Input surface : 4096x2160p at 60 8k x 8k maximum
Genlock input : Analog black-burst on dedicated BNC connector. Any video input (SDI, HDMI, DisplayPort)
Control interfaces : Dual 100BaseT Ethernet ports with inbuilt managed switch. USB 2.0 Type B connector (full speed operation)
Firmware support : Updates supported via USB and Ethernet connection
Storage : -20 to 70°C
Relative humidity : 5%-90% non-condensing
Warranty : 3 years

Datapath Fx4-SDI

    bottom of page